How to Diagnose and Resolve Garage Door Problems?

How to Diagnose and Resolve Garage Door Problems?

Having a garage in your home is not less than a blessing. It not only provides enough space to park your car but also provides a space to store your belongings. Having a garage door that won’t operate properly can be a daunting and frustrating thing for a homeowner. If your garage door does not open to let your car out in the morning or do not let you go back in at the end of the day, it will be the worst thing to face. However, you can diagnose and resolve garage door problems.

Small garage door issues can be resolved via DIY ways. However, you need to be very careful while you attempt these ways. You need a proper guide on how to troubleshoot a garage doorbefore you get your tools and gears ready. When doing small repairs and maintenance of your garage door, make sure the power is disconnected, and the garage door is also in the down position.

Here is a complete guide on how to diagnose and resolve Garage Door Problems. Just a little reminder; these troubleshooting tips should be done very carefully. If the issues are unable to resolve via DIY methods, hire professional garage door specialists in Fresno, VA.

Unbale To Open or Close the Door

If your garage door is not opening or closing, it will become the reason behind your tension and anxiety. You can begin with these garage door troubleshooting steps:

  • Make sure that your garage door is not manually locked by mistake.
  • Ensure that the opener is plugged in, and the garage circuit breaker is in the right place.
  • The issue can be with the remote control or the keyboard batteries, make sure to replace it.
  • Make sure that you are within the recommended range and position while using the garage door remote.
  • There could be an issue with the photo-eye. You need to first clean and then make sure that it is perfectly aligned.

Check External Controls

If the garage door opener is plugged in, but the door does not open or close, there is a possibility that the issue is with the external controls such as the keypad, wall switch or the remote control. Here is how to Diagnose and Resolve Garage Door Problems:

  • Make sure to test all the external controls to determine if any of them is faulty.
  • If your garage door opener motor has an antenna to operate via remote control, ensure that it is not damaged and placed in the correct position.
  • If your remote control has batteries, it may need to be replaced. Moreover, the universal garage door remote controls can work for many openers.
  • You can also reset or reprogram the remote control or the keypad by getting in touch with the respective owner’s manual.
  • Make sure to inspect the wall switch because if the remote is working perfectly, the switch needs new wiring, or it needs to be replaced.

Look for Garage Doors’ Safety Sensors

If your garage door is not closing all the way or closes and opens immediately, the issue can be with its sensors, which are designed to stop the garage door from closing on an object or a person. Here is what you can do to do prevent this:

  • Ensure that the sensors are in proper alignment and pointing each other.
  • Make sure to clean the sensors with a soft cloth and a cleaner. It will ensure that there is no dust on the photo-eye and make sure to wipe away moisture without scratching the sensors.
  • Ensure that no toys or any object are obstructing the sensors for the proper functioning of your garage door.

Adjusting the Limit Setting

The garage door opener motor has the switches that specify when the motor should stop while closing or opening the door to ensure safety. If the closing or opening limit switches are not set correctly, they can be the reason to prevent the opening and closing of the garage door. Every garage door opener motor has a lever or screw feature that controls the limit switches. You can easily adjust them until your door closes or opens to the desired places. However, suppose you are unable to troubleshoot this issue. In that case, you should make your way to reliable and experienced garage door installers in Fresno to get rid of the problem you are facing.

Check the Door’s Cables and Springs

One of the key elements involved in the garage door’s proper functioning is its cables and torsion springs. Your garage door springs and cables can wear out over time. The broker cables and springs can prevent the door from opening or closing. The best way to deal with this issue is to replace the springs and cables. However, it is a risky task. It is better to hire expert garage door installers in Fresno to replace or install the springs or cables. The professionals can provide you with quality services within affordable rates.

Check the Tracks and Rails

If there is no issue with the motors, sensors, and springs, its time to check other parts of your garage door such as tracks and rails. Here is what you can do to fix the tracks and rails:

  • Your garage doors open and close along with a metal tract that can prevent the door from opening and closing if it is not aligned correctly. To troubleshoot this problem, you can realign the track by loosening the screws and holding it to the garage door frame. Use a rubber hammer to tap the track back in the right position. You can use a level to confirm its straightness. Tighten the screws until the track is perfectly aligned.
  • Replace the rusted steel or nylon rollers because they can be a major reason behind the improper garage door opening and closing.
  • Lubrication is necessary because too much friction can also prevent the door from opening or closing smoothly. Make sure to use a silicone spray for lubrication.

Leave a Reply

Your email address will not be published. Required fields are marked *